Supermicro Supero SuperServer 5018A-MLTN4, User Manual

Page: 102 / 120

7-18
SUPERSERVER 5018A-MLTN4 User's Manual
Above 4G Decoding
Select Enabled for 64-bit devices to be decoded above the 4GB address space
if 64-bit PCI decoding is supported by the system. The options are Disabled and
Enabled.
Storage
This feature allows the user to determine how the system handles UEFI and
Legacy Storage OpROM instructions. The options are Do not Launch, UEFI ,
and Legacy.
CPU1 Slot 4 PCI-E 2.0x4 OPROM/CPU1 Slot 6 PCI-E 2.0x8 OPROM
Use this feature to confi gure the Option ROM (OPROM) setting for a PCI-E slot
specifi ed by the user. Option ROM allows the computer to boot up using a device
installed on the slot specifi ed. The options are Disabled, Legacy and EFI.
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM/ Onboard LAN3
Option ROM/Onboard LAN4 Option ROM
This feature allows the user to confi gure the Option ROM (OPROM) setting for a
PCI-E slot specifi ed by the user. Option ROM allows the computer to bootup using
a device installed on the slot specifi ed. Select iSCSI to use the iSCSI Option ROM
to boot the computer using an iSCSI device installed in a LAN port specifi ed.
Select PXE (Preboot Execution Environment) to boot the computer using a PXE
device installed in a LAN port specifi ed. Select Disabled to prevent system boot
using a device installed in a LAN port. The options are Onboard LAN1 Option ROM
are Disabled, PXE and iSCSI. The options for Onboard LAN2 Option ROM, LAN3
Option ROM, and LAN4 Option ROM are Disabled and PXE.
Network Stack
Select Enabled to enable UEFI (Unifi ed Extensible Firmware Interface) for network
stack support. The options are Enabled and Disabled .
Ipv4 PXE Support (Available when Network Stack is set to Enabled)
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for boot sup-
port. If this feature is set to Disabled, Ipv4 PXE boot option will not be supported.
The options are Enabled and Disabled.
Ipv6 PXE Support (Available when Network Stack is set to Enabled)
Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for boot sup-
port. If this feature is set to Disabled, Ipv6 PXE boot option will not be supported.
The options are Enabled and Disabled .