4-17
Chapter 4: Chassis Setup and Maintenance
The SC732 chassis includes either a 500 Watt or a 865 Watt power supply. In the
unlikely event that it becomes necessary to replace the power supply, follow the
instructions below.
4-11 Power Supply
Changing the Power Supply
Disconnect the chassis from any power source.
1.
Disconnect the motherboard cables.
2.
Remove the screws securing the power supply to the chassis, which are
3.
located on the rear of the chassis. Set these screws aside for later use.
Gently lift the power supply out of the chassis.
4.
Replace the failed power supply with an identical power supply model.
5.
Secure the new power supply using the screws previously set aside.
6.
Plug the AC power cord back into the module and power-up the system.
7.
Figure 4-16: Removing the Power Supply
Power Supply
Summary of Contents for Supero SC732 Series
Page 6: ...SC732 Chassis Manual vi Notes ...
Page 20: ...SC732 Chassis Manual 3 6 Notes ...