SC731 Chassis Manual
4-14
The SC731 chassis includes a 300 Watt power supply. In the unlikely event that it
becomes necessary to replace the power supply, follow the instructions below.
4-10 Power Supply
Changing the Power Supply
Disconnect the chassis from any power source.
1.
Disconnect the motherboard cables.
2.
Remove the screws securing the power supply to the chassis, which are
3.
located on the rear of the chassis. Set these screws aside for later use.
Gently lift the power supply out of the chassis.
4.
Replace the failed power supply with an identical power supply model.
5.
Secure the new power supply using the screws previously set aside.
6.
Plug the AC power cord back into the module and power up the server.
7.
Figure 4-13: Removing the Power Supply
Power Supply
