A+ SERVER 1042G-TF User's Manual
5-22
IPMI LED
The serverboard contains an IPMI LED
(DP1) located near the corner above the
PCI-E slots. When this LED is lit, it means a
connection is active for the built-in IPMI on
the serverboard.
IPMI LED (DP1)
State System Status
On
Active connection
Off
No connection
5-10 SAS and SATA Drive Connections
SATA Ports
There are no jumpers to confi gure the SATA
ports, which are designated SATA0 through
SATA5. See the table on the right for pin
defi nitions.
SATA Ports
Pin Defi nitions
(SATA0-SATA5)
Pin # Defi nition
1
Ground
2
TXP
3
TXN
4
Ground
5
RXN
6
RXP
7
Ground
Summary of Contents for Supero A+ SERVER 1042G-TF
