Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 166 / 404

Superblade Network Modules User’s Manual
7-38
SNMP Target Parameter Settings
Clicking the T
ARGET
P
ARAMETER
tab brings up the SNMP T
ARGET
P
ARAMETER
S
ETTINGS
page ( Figure 7-32 ), which configures SNMP Target Address parameters. The
parameters for this page are shown in Table 7-21 .
Target Timeout
T
ARGET
T
IMEOUT
specifies the maximum round trip for communicating with
the T
ARGET
IP A
DDRESS
.
Target Retries
T
ARGET
R
ETRIES
specifies the number of attempts to be made when no
response is received
Transport Tag
The T
RANSPORT
T
AG
value is used to select a target address for a particular
operation.
Param
P
ARAM
contains SNMP parameters to be used when generating messages
to be sent to a transport address.
Storage Type
Use this parameter to specify whether the S
TORAGE
T
YPE
is volatile or
non-volatile .
Figure 7-32. SNMP Target Parameter Settings Page
Table 7-20. SNMP Target Address Settings Page Parameters (Continued)
Parameter Description