Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 167 / 404

7-39
Chapter 7: Layer 2/3 Ethernet Switch Firmware
SNMP User Settings
Clicking the U
SER
tab brings up the SNMP S
ECURITY
S
ETTINGS
page ( Figure 7-33 ),
which configures users configured in the SNMP for the User-based Security Model. The
parameters for this page are shown in
Table 7-22 .
Table 7-21. SNMP Target Parameter Settings Page Parameters
Parameter Description
Parameter Name
The target parameter is an unique name that specifies SNMP target
information to be used in the generation of SNMP messages.
MP Model
The Message Processing (MP) Model is used when generating SNMP
messages using this entry.
Security Model
The S
ECURITY
M
ODEL
is used when generating SNMP messages using this
entry.
Security Name
The S
ECURITY
N
AME
identifies the current P
ARAMETER
N
AME
, on whose
behalf SNMP messages will be generated.
Security Level
S
ECURITY
L
EVEL
specifies the level of security used when generating
SNMP messages.
Storage Type S
TORAGE
T
YPE
can be configured as Volatile or Non-Volatil
E
.
Figure 7-33. SNMP Security Settings Page