SuperBlade Server SBA-4119S-(C/T)2N User's Manual
16
Removing a Blade Unit from the Enclosure
A blade can be removed from the enclosure while other blades continue to operate.
Removing a Blade Unit from the Enclosure
1.
Power down the blade unit.
2. Lift the handle completely and use it to pull the blade unit from the enclosure.
Removing or Replacing the Blade Cover
The blade cover can be removed to access the mainboard and install processors, memory
modules, the onboard battery, etc.
•
To remove the cover, after removing the blade module from the enclosure, push the cover
toward the rear of the blade unit. When it stops, lift the cover off the blade unit.
•
To replace the cover, fit the six grooves in the cover into the studs in the sides of the blade,
then slide the cover toward the front of the blade to lock it into place.
