15
Chapter 2 Installation and Setup
Figure 2-1. Installing the a Blade into the Enclosure
2.2 Installing or Removing the Blade Unit
Installing a Blade Unit into the Enclosure
Make sure the cover of the blade unit is on before insertion.
Installing a Blade Unit into the Enclosure
1.
Pull open the blade locking handle and slowly push the blade into its bay as pictured
below.
2. When the blade stops, push the handle into its locked position, making sure the notch in
the handle catches the lip of the enclosure.
Caution
: Insert the blade carefully to avoid damaging the connectors in the enclosure bay.
