Supermicro SUPER P6DKE, User Manual

Page: 31 / 60

2-5
Chapter 2: Installation
OEM Pentium II and Heat Sink Support
The heat sink support shown on Figure 2-5 consists of a top bar, a
base bar, four posts on the top bar and two posts on the base bar.
The two posts on the base snaps into the motherboard. Install the
two pins into the base bar. Insert the Pentium II with the heat sink
on it into Slot 1. Install the top support bar. The four top posts
should be close to Slot 1. The bottommost row of fins in the heat
sink should fit between the top support bar and the bottom support
bar as shown in Figure 2-6.
Figure 2-5. Heat Sink Support
Figure 2-6. Pentium II Heat Sink
Heat Sink