Supermicro SSE-X3648S, Installation Manual

Page: 44 / 46

SSE-X3648S/SSE-X3648SR Switch Installation Manual
4-10
Grounding Cable Connection
Please connect the grounding cable according to the following procedure.
Connecting the Grounding Cable
1. Cover one side of the grounding cable to the earthing pillar of the back panel.
2. Take out the screw from accessories, put and screw down the fixed nut on the
grounding pillar of the switch,.
3. Connect another side of the grounding cable to the grounding side.
Caution! The unit must be permanently connected to ground.
Checking the Switch
After installing and setting up the switch, verify the following:
• Whether the used power corresponds to the power of the sign.
• Whether the ground cable is connected.
• Whether the Console cable is connected to the console port.
• If there are cables at the outside, please ensure the cable is well connected with
lightning protection devices.
Figure 4-8. Connect the Grounding Cable to the Switch