Supermicro SSE-X3348S, Installation Manual

Page: 58 / 76

SSE-X3348S/SSE-X3348SR Switch Installation Manual
5-8
Connection Procedure
Follow the procedure below to connect cables to 1000BASE-T RJ-45 twisted-pair
copper ports.
Connecting Cables to 1000BASE-T RJ-45 Twisted Pair Copper Ports
1. Attach one end of a twisted-pair cable segment to the device’s RJ-45 connector.
2. Attach the other end to an available port on the switch.
Make sure each twisted pair cable does not exceed 100 meters (328-ft) in length.
3. As each connection is made, the Link LED (on the switch) corresponding to each
port will turn on green to indicate that the connection is valid.
Figure 5-4. Making Twisted-Pair Connections
1000BASE-T
RJ-45 Ports