Supermicro SSE-X3348S, Installation Manual

Page: 12 / 76

SSE-X3348S/SSE-X3348SR Switch Installation Manual
1-2
1-2 Key Hardware Components
The switch consists of several key hardware components ( Figure 1-1 ). This manual
describes each specific component, or related components, together with their
installation requirements and procedures in each chapter. To understand each
component in detail, refer to the relevant section.
Figure 1-1. Front and Rear Panels
10G SFP+ Slots
The switch contains 48 Small Form Factor Pluggable Plus (SFP+) transceiver slots that
support 10G Ethernet SFP+ transceivers, or Gigabit Ethernet SFP transceivers. For
more information, see
Section 5-5: "How to Connect to SFP/SFP+ Fiber Optic Ports" on
page 5-9 .
40G QSFP+ Slots
The switch contains four Quad Small Form Factor Pluggable Plus (QSFP+) transceiver
slots that operate up to 40 Gbps full duplex. For more information, see
Section 5-6:
"How to Connect to QSFP+ Fiber Optic Ports" on page 5-11 .
1000BASE-T RJ-45 Ports
The switch includes two 1000BASE-T RJ-45 ports. For more information, see
Section 5-4: "How to Connect to Twisted-Pair Copper Ports" on page 5-5 .
Port LEDs System Indicators 1000BASE-T Ports
Reset Button
Console Port
Fan Tray Module
Front Panel
Rear Panel
10G SFP+ Ports 40G QSFP+ Ports
USB Port
Power Supply Modules