Supermicro SSE-G2252, User Manual, Page: 92 / 1401

Chapter 4: Basic Management Tasks
Resetting the System
– 94 –
P
ARAMETERS
The following parameters are displayed:
•
Free Size – The amount of memory currently free for use.
•
Used Size – The amount of memory allocated to active processes.
•
Total – The total amount of system memory.
W
EB
I
NTERFACE
To display memory utilization:
1.
Click System, then Memory Status.
Figure 4-24: Displaying Memory Utilization
R
ESETTING THE
S
YSTEM
Use the System > Reset menu to restart the switch immediately, at a
specified time, after a specified delay, or at a periodic interval.
CLI R
EFERENCES
•
“reload (Privileged Exec)” on page 650
•
“reload (Global Configuration)” on page 646
•
“show reload” on page 651
C
OMMAND
U
SAGE
•
This command resets the entire system.
•
When the system is restarted, it will always run the Power-On Self-Test.
It will also retain all configuration information stored in non-volatile
memory by the copy running-config startup-config command (see
“copy” on page 667 ).
P
ARAMETERS
The following parameters are displayed:
System Reload Information
• Reload Settings – Displays information on the next scheduled reload
and selected reload mode as shown in the following example: