Supermicro SSE-G2252, User Manual

Page: 659 / 1401

Chapter 20: System Management Commands
File Management
– 667 –
filename - Name of configuration file or code image.
* The colon (:) is required.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
•
A colon (:) is required after the specified file type.
•
If the file contains an error, it cannot be set as the default file.
E
XAMPLE
Console(config)#boot system config: startup
Console(config)#
R
ELATED
C
OMMANDS
dir (671)
whichboot (672)
copy
This command moves (upload/download) a code image or configuration file
between the switch’s flash memory and an FTP/SFTP/TFTP server. When
you save the system code or configuration settings to a file on an FTP/
SFTP/TFTP server, that file can later be downloaded to the switch to restore
system operation. The success of the file transfer depends on the
accessibility of the FTP/SFTP/TFTP server and the quality of the network
connection.
S
YNTAX
copy file { file | ftp | running-config | startup-config | sftp | tftp }
copy running-config { file | ftp | startup-config | tftp }
copy startup-config { file | ftp | running-config | tftp }
copy tftp { add-to-running-config | file | https-certificate |
public-key | running-config | startup-config }
add-to-running-config - Keyword that adds the settings listed in
the specified file to the running configuration.
file - Keyword that allows you to copy to/from a file.
ftp - Keyword that allows you to copy to/from an FTP server.
https-certificate - Keyword that allows you to copy the HTTPS
secure site certificate.
public-key - Keyword that allows you to copy a SSH key from a
TFTP server. ( See “Secure Shell” on page 782. )