Supermicro SSE-G2252, User Manual

Page: 643 / 1401

Chapter 19: General Commands
– 651 –
E
XAMPLE
This example shows how to reset the switch:
Console#reload
System will be restarted, continue <y/n>? y
show reload
This command displays the current reload settings, and the time at which
next scheduled reload will take place.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show reload
Reloading switch in time: 0 hours 29 minutes.
The switch will be rebooted at January 1 02:11:50 2001.
Remaining Time: 0 days, 0 hours, 29 minutes, 52 seconds.
Console#
end
This command returns to Privileged Exec mode.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Global Configuration, Interface Configuration, Line Configuration, VLAN
Database Configuration, and Multiple Spanning Tree Configuration.
E
XAMPLE
This example shows how to return to the Privileged Exec mode from the
Interface Configuration mode:
Console(config-if)#end
Console#
exit
This command returns to the previous configuration mode or exits the
configuration program.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Any