SSE-C3632S/SR Switch Installation Guide
Page 38
AC Power Supply Connection
SSE-C3632S/R uses 220/110VAC power supply by default. Please read the power input specification
for detailed information.
Figure 44-8. Connecting the Power Supply Cable to the Switch
The AC Power supply connection procedure is described as follows:
1. Insert one end of the power cable provided in the accessory kit into power source socket, and
the other end to the power socket (with overload and leakage protection).
2. Check the power status indicator in the front panel of the switch. The corresponding PWR
indicator should light. SSE-C3632S/R is self-adjusts to the input voltage. As soon as the input
voltage is in the range printed on the switch surface the switch can operate correctly.
3. When the switch is powered on, it executes a self-test procedure and starts up.
Caution:
The input voltage must be within the required range, otherwise the switch can be damaged
or malfunction. Do not open the switch shell without permission. It can cause physical injury. Disconnect
all power supply cords before servicing.
