SCF424 Chassis Manual
5-2
6. Grasp the node by the handles on either side of the front of the node.
7. Carefully pull the node forward and out of the chassis.
5-4 Installing and Removing Hard Drives
The SCF424 chassis contains individual motherboards in separate 2U nodes.
Each motherboard node controls the hard drives contained within that node. Note
that if a motherboard node is pulled out of the chassis, the hard drives associated
with that node will power down as well. Refer to the charts below and on the fol-
lowing pages for your specific chassis configuration. These instructions apply to
hot-swappable hard drives in both 2.5" and 3.5" sizes. Hot-swappable hard drives
can be removed from the chassis without powering down the server or removing
the node from the chassis.
Only enterprise level hard drives are recommended for use in Supermicro chassis.
Figure 5-1: Hard Drives and the Corresponding Motherboards
(Your chassis and drives may differ from those shown in this illustration)
Node 2
Node 4
Node 1
Node 3
SCF424AF-R1K62BP
Node 2
Controls four 3.5" HDDs, B1-B4 and
six internal 3.5" HDDs B5-B10
Node 4
Controls four 3.5" HDDs, D1-D4
and six internal 3.5" HDDs D5-D10
Node 1
Controls four 3.5" HDDs, A1-A4 and
six internal 3.5" HDDs A5-A10
Node 3
Controls four 3.5" HDDs, C1-C4
and six internal 3.5" HDDs C5-C10
