background image

3

Preface

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It provides 
information for the installation and use of the chassis. Installation and maintenance should 
be performed by experienced technicians only.
This document lists compatible parts available when this document was published. Refer to 
the Supermicro web site f

or updates on supported parts and configurations.

This manual may be periodically updated without notice. Please check the Supermicro website 
for possible updates.(

http://www.supermicro.com

).

Notes

For your system to work properly, please follow the links below to download all necessary 
drivers, utilities and the user’s manual for your server.

• 

Supermicro product manuals: 

http://www.supermicro.com/support/manuals/

• 

Product safety info: 

http://www.supermicro.com/about/policies/safety_information.cfm

If you have any questions, please contact our support team at: 

[email protected]

Warning! 

Indicates high voltage may be encountered when performing a procedure.

Warning! 

Indicates important information given to prevent equipment/property damage 

or personal injury.

Summary of Contents for SCE300








































Reviews: