background image

4

SCE300 Chassis User's Manual

Contents

Chapter 1 Introduction

1.1 Features ...............................................................................................................................6

Front Features .....................................................................................................................7
Rear Features .....................................................................................................................8

1.2  Mounting Brackets ................................................................................................................9

Installing Rack Mounting Brackets ......................................................................................9
Mounting on a Wall ...........................................................................................................10

1.3  Unpacking the System .......................................................................................................11
1.4  Where to get Replacement Components ...........................................................................11
1.5  Returning Merchandise for Service ....................................................................................11

Chapter 2 Maintenance and Component Installation

2.1  Removing Power ................................................................................................................12
2.2  Accessing the System ........................................................................................................13
2.3  Chassis Components .........................................................................................................14

Installing a Storage Drive .................................................................................................14
Expansion Card  ...............................................................................................................16
System Cooling .................................................................................................................18

Appendix A Power Supply Specifications
Appendix B Standardized Warning Statements for AC Systems

Summary of Contents for SCE300








































Reviews: