5-6
SC842 Chassis Manual
Figure 5-5. Removing the Internal HDD Cage
Removing the Hard Drive Cage (SC842i Series)
Removing the Hard Drive Cage
1. Power down the system and remove the power cord from the rear of the
power supply. Remove the cords from both power supplies if your chassis
includes a redundant power module. Remove the chassis cover as described
in Section 5-2.
2.
Remove the four screws securing the internal hard drive cage and bracket to
the chassis as illustrated below and set them aside for later use.
3. Gently push the internal hard drive cage out through the front of the chassis.
Remove Four
Screws
1
2
1
3
