4-9
Chapter 4: Chassis Setup and Maintenance
4-6 Installing the I/O Shield and Motherboard
I/O Shield
An I/O shield holds the motherboard ports in place. Install the I/O shield before you
install the motherboard. The maximum size of motherboard supported by the SC732
is a 12" x 13" extended ATX motherboard. The motherboard is sold separately from
the SC732 chassis and comes with an I/O shield specific to the motherboard.
Installing the I/O Shield
1. Review the documentation that came with the motherboard. Become familiar
with component placement, requirements, and safety precautions.
2. Power down the system and remove the power cord from the rear of the
power supply. Remove the chassis side cover as described in Section 4-2.
3. With the illustrations facing the outside of the chassis, slide the I/O shield into
the space provided.
4. Once installed, the chassis will hold the I/O shield in place.
5. Plug the power cord back into the power module, replace the chassis cover
and power-up the system.
I/O Shield
Figure 4-8. I/O Shield Placement
