Supermicro SC118G-R1400B User Manual Download Page 17 | Manualshive

Page: 17 / 66

background image

3-1

Chapter 3: Chassis Components

Chapter 3

Chassis Components

3-1 Overview

This chapter describes the most common components included with your chassis.
Some components listed may not be included or compatible with your particular
chassis model. For more information, see the installation instructions detailed later
in this manual.

3-2 Components

Chassis

The SC118G chassis includes six 2.5" hard drive bays and options for peripheral
drives. For the latest options, visit our Web site at: http://www.supermicro.com.
This chassis accepts a 1U backplane, up to eight fans and a power supply. SC118G
models come in black.

Backplane

Each SC118G chassis comes with a 1U backplane. The backplane will accept SAS/
SATA. For more information regarding compatible backplanes, view the appendices
found at the end of this manual. In addition, visit our Web site for the latest informa-
tion: http://www.supermicro.com.

Fans

The SC118G chassis accepts up to eight system fans. System fans for SC118G
chassis are powered from the serverboard. These fans are 1U high and are powered
by 4-pin connectors.

Rack Mounting

The SC118G can be mounted in a rack for secure storage and use. To install the
chassis in a rack, follow the step-by-step instructions included in this manual.

«
...
15
16
17
18
19
...
»

Summary of Contents for SC118G-R1400B



































































Reviews:

No comments

Related manuals for SC118G-R1400B

Brand: IEI Technology Pages: 10

Brand: HP Pages: 97

Brand: HP Pages: 145

Supero SC745 Series

Brand: Supermicro Pages: 26

Brand: Supermicro Pages: 54

Brand: Supermicro Pages: 62

Brand: Fire-Lite Pages: 1

MHUB PRO (8X8) 70

Brand: HDanywhere Pages: 2

Brand: National Instruments Pages: 12

Brand: National Instruments Pages: 20

Brand: Ihse Pages: 4

Brand: ADC Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands