Supermicro SBI-7425C-S3E, User Manual

Page: 31 / 86

4-1
Chapter 4
Blade Module Features
Figure 4-1. SBI-7425C-S3/S3E Blade Unit Front View
This chapter describes the SBI-7425C-S3/S3E blade unit. Installation and maintenance
should be performed by experienced technicians only.
See Figure 4-1 for a front view of the blade unit and Table 4-1 for its features.
Table 4-1. SBI-7425C-S3/S3E Blade Unit Features
Feature Description
Processors
Supports single or dual 771-pin Intel Xeon 5400/5300/5200/5100 series
processors
Memory
Supports up to 24 GB of ECC Registered DDR2-667/533 SDRAM in six
DIMM slots
Storage Three hot-plug 2.5" hot-plug SAS/SATA hard disk drives
Ports KVM port (1), SATA ports (3)
Features
Onboard ATI ES1000 graphics chip with 32MB of SDRAM, IPMI 2.0, ATA/
100, Plug and Play, APM 1.2, DMI 2.3, PCI 2.2, ACPI 1.0/2.0, SMBIOS
2.3, Real Time Clock, Watch Dog,
Power Consumption
Base Power Draw (~35W) / Power per CPU (50W/80W/120W) / Power per
DIMM (typically 14.5W)