Supermicro SBI-7228R-T2F, User Manual, Page: 10 / 86

SBI-7228R-T2F Blade Module User’s Manual
1-2
1-3 Blade Module Features
Table 1-1 lists the main features of the SBI-7228R-T2F blade module. See the
proceeding section for components typically included in a blade system and other
optional components. Specific details for the SBI-7228R-T2F blade module are found in
Chapter 4: "Blade Module Features" on page 4-1 .
Processors
The SBI-7228R-T2F blade module supports four 2011-pin Socket R (LGA 2011)
E5-2600 (V3) series processors grouped two per node.
Refer to the Supermicro web site for a complete listing of supported processors ( http://
www.supermicro.com/products/superblade ). Please note that you will need to check the
detailed specifications of a particular blade module for a list of the CPUs it supports.
Details on installation of the processor into the SBI-7228R-T2F blade module are found
in
Chapter 3: "Setup and Installation" on page 3-1 .
Memory
Both the SBI-7228R-T2F blade module have eight (8) 288-pin DIMM sockets that can
support up to 256 GB RDIMM or 512 GB LRDIMM DDR4 2133/1866/1600/1333/1066/
800 MHz speed, 64GB, 32GB, 16GB, 8GB, 4GB, 2GB and 1GB size SDRAM memory
per node. Memory is interleaved, which requires modules of the same size and speed to
be installed in groups (of two or three).
Please refer to the Supermicro web site for a list of supported memory
(
www.supermicro.com/products/superblade ). The detailed specifications for a blade
module will contain a link to a list of recommended memory sizes and manufacturers.
Table 1-1. SBI-7228R-T2F Blade Module Specification Features
Mainboard
B10DRT-TP (proprietary form factor)
Chassis Dimensions (HxWxD): 11.32" x 1.67" x 20.5" (288-mm x 42-mm x
521-mm)
Processors
Four eight/six/four core Intel
™
Xeon
®
E5-2600 (V3) series 2011-pin
processors. Two of these processors are available for each node. Please
refer to our web site for a complete listing of supported processors.
QPI Speed QPI up to 9.6 GT/s
Chipset One Intel C612 chip set for each node
Graphics Controller Integrated Aspeed AST 2400 VGA Graphics chip for each node
BIOS 128 Mb SPI Flash EEPROM with AMI® BIOS for each node
Memory Capacity
Supports up to 256 GB of RDIMM or 512 GB of LRDIMM DDR4 2133/
1866/1600/1333/1066/800 MHz speed and 64GB, 32GB, 16GB, 8GB,
4GB, 2GB and 1GB size SDRAM memory in eight (8) 288-pin DIMM
sockets for each node
Hard Drive Bays
Includes four hot-swap drive bays for 2.5" SATA/SSD disk drives (two per
node), and two internal SATADOM (one per node)