Supermicro SBI-7147R-S4F User Manual Download Page 67

Page: 67 / 84

5-15

Chapter 5: BIOS

5-6

Event Logs Setup

Table 5-11. ACPI Settings Sub-menu

Menu Option

Description

ACPI Sleep State

This setting selects the highest ACPI sleep state the system will enter when the
SUSPEND button is pressed. Options include Suspend Disabled and

S1 (CPU

Stop Clock)

Numa

This setting

Enables

or Disables Non Uniform Memory Access (NUMA).

High Precision Timer

Use this setting to

Enable

or Disable the High Precision Event Timer.

Table 5-12. Trusted Computing Subsystem Sub-menu

Menu Option

Description

TPM Support

This setting

Enables

or Disables BIOS support for a security device. The OS will

not show the security device, TCG EFI protocol and INT1A interface will not be
available if disabled.



Intel TXT (LT-SX)

Configuration

This sub-menu provides Intel TXT(LT-SX) Hardware Support information and
allows you to configure the Intel Trusted Execution Technology Configuration
using the TXT Support setting.

TXT Support

TXT requires a properly configured TPM, LT-SX enabled CPU and
dependencies (listed under this setting). Options include Enabled or

Disabled

Table 5-13. ME Subsystem Sub-menu

Menu Option

Description

Intel ME Subsystem
Configuration

This static information displays the ME BIOS Interface Version and the ME
Version for your system.

ME Subsystem

This setting allows you to

Enable

or Disable ME Subsystem help.

Table 5-14. Event Logs Menu

Menu Option

Description



Change SMBIOS

Event Log Settings

This sub-menu allows you to change the SMBIOS Event Log configuration
settings.

SMBIOS Event
Log

This setting allows you to

Enable

or Disable SMBIOS Event Logging.

Runtime Error
Logging Support

This setting allows you to

Enable

or Disable runtime error logging support.

Memory Corr.
Error Threshold

This setting allows you to enter the memory correctable error threshold value
(default value is

PCI Error Logging
Support

This setting allows you to Enable or

Disable

PCI error logging for your system.

Summary of Contents for SBI-7147R-S4F





















































































Search results

Summary of Contents for SBI-7147R-S4F

Reviews:

Related manuals for SBI-7147R-S4F

Brands by name

Popular brands

Supermicro SBI-7147R-S4F, User Manual

Search results

Summary of Contents for SBI-7147R-S4F

Reviews:

Related manuals for SBI-7147R-S4F

Brands by name

Popular brands