Supermicro SBI-7126TG, User Manual, Page: 47 / 70

5-5
Chapter 5: BIOS

SuperIO Device
Configuration
See Table 5-8 for a description of BIOS setup menu options in this sub-menu.

Remote Access
Configuration
See Table 5-9 for a description of BIOS setup menu options in this sub-menu.

System Health
Monitor
See Table 5-10 for a description of BIOS setup menu options in this sub-menu.

ACPI Configuration See Table 5-11 for a description of BIOS setup menu options in this sub-menu.

IPMI Configuration See Table 5-12 for a description of BIOS setup menu options in this sub-menu.

Event Log
Configuration
See Table 5-13 for a description of BIOS setup menu options in this sub-menu.
Table 5-3. Boot Feature Sub-menu
Menu Option Description
Quick Boot
This setting allows the BIOS to skip certain tests while booting. This will
decrease the time needed to boot the system. Options include
Enabled and
Disabled.
Quiet Boot
When Disabled the BIOS displays normal POST messages. When Enabled the
BIOS displays an OEM Logo instead of POST messages.
AddOn ROM Display
Mode This setting sets the display mode for Option ROM. Options include Force BIOS
or Keep Current.
Bootup NUM-Lock This setting selects the Power-On state for Numlock. Options include On or Off.
Wait for ‘F1’ If Error
When enabled, the system will wait for the F1 key to be pressed if an error
occurs. Options are
Enabled or Disabled.
Hit ‘DEL’ Mesage
Display This setting displays “Press DEL to run Setup” in POST. Options include
Enabled or Disabled.
Interrupt 19 Capture
When enabled this setting allows option ROMs to trap Interrup 19. Options
include
Enabled or Disabled.
Watch Dog Function
This setting allows the system to restart when it is not active more than 5
minutes. Option include Enabled and
Disabled .
Power Button
Function This setting specifies the power button’s function when pressed. Option include 4
Seconds Override or
Instant Off .
Restore on AC Power
Loss
This setting specifies what the system will do when power is restored after an AC
power loss to the system. Options include
Power Off (system power remains off
after power loss), Power-On (system power turns on after power loss) or Last
State (allows the system to resume its last state before the power loss).
Table 5-2. Advanced Setup Menu Options (Continued)
Sub-menu Description