Supermicro SBI-7126TG, User Manual, Page: 12 / 70

SBI-7126TG Blade Module User’s Manual
1-2
1-3 Blade Module Features
Table 1-1 lists the main features of the SBI-7126TG blade module. See the proceeding
section for components typically included in a blade system and other optional
components. Specific details on the SBI-7126TG blade module is found in
Chapter 4:
"Blade Module Features" on page 4-1 .
Processors
The SBI-7126TG blade module supports up to dual 1366-pin Intel Xeon 5500/5600
series processors.
Refer to the Supermicro web site for a complete listing of supported processors ( http://
www.supermicro.com/products/superblade ). Please note that you will need to check the
detailed specifications of a particular blade module for a list of the CPUs it supports.
Details on installation of the processor into the SBI-7126TG blade module are found in
Chapter 3: "Setup and Installation" on page 3-1 .
Table 1-1. SBI-7126TG Blade Specification Features
Mainboard
B8DTG (proprietary form factor)
Chassis Dimensions (HxWxD): 11.32” x 1.67” x 18.9”
Processors
Single or dual Intel
™
Xeon
®
5500/5600 Sequence processors. Please
refer to our web site for a complete listing of supported processors.
FSB Speed QPI 4.8/6.4G bus speed
Chipset Intel ICH10/Intel ICH10 Northbridge/Southbridge
Graphics Controller Onboard Matrox G200eW Graphics chip with 16MB of SDRAM
BIOS 32 Mb AMI
®
SPI Flash EPROM BIOS
Memory Capacity
Six 240-pin DIMM sockets supporting up to 96 GBECC Registered
DDR3-1333/1066/800 SDRAM.
Expansion Slots Two (2) PCI-E 2.0 x16 expansion slots