Supermicro SBI-7126T-SH, User Manual

Page: 50 / 70

SBI-7126T-SH Blade Module User’s Manual
5-8
Allocate IRQ to PCI
VGA
Select Yes to assign IRQ to the PCI VGA card if the card requests IRQ.
Selecting N
O
does not assign IRQ to the PCI VGA card even if the card requests
an IRQ.
Palette Snooping
When E
NABLED
, this informs PCI devices that an ISA graphics device is installed
in the system so the card will function correctly. The default is Disabled .
PCI IDE BusMaster
When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE
devices. The options are D
ISABLED
and Enabled .
SR-IOV Support This setting Enables or Disables SR-IOV Support.
Onboard NIC Option
ROM This setting allows you to specify the option used for Onboard NIC Option ROM.
Options include
Disabled , PXE or
I
SCSI.
Table 5-6. SuperIO Configuration Sub-menu
Menu Option Description
Serial Port1 Address
This option specifies the base I/O port address and the Interrupt Request
address of Serial Port 1. Select Disabled to prevent the serial port from
accessing any system resources. When this option is Disabled, the serial port
physically becomes unavailable. Select
3F8/IRQ4 to allow the serial port to use
3F8 as its I/O port address and IRQ 4 for its interrupt address. Options are
D
ISABLED
, 3F8/IRQ4 , 3E8/IRQ4 and 2E8/IRQ3.
Serial Port2 Address Same as above, but options are D
ISABLED
, 2F8/IRQ3 , 3E8/IRQ4 and 2E8/IRQ3.
Serial Port2 Mode
This setting allows the BIOS to select the mode for Serial Port 2. Options are
Normal , I
R
DA and ASK IR.
Watch Dog Timer User this setting to E
NABLE
or Disable the Watch Dog Timer.
Table 5-7. Chipset Configuration Sub-menu
Menu Option Description

CPU Bridge
Configuration
This sub-menu configures CPU Bridge features as well as showing
Configuration information.
QPI Links Speed
This option allows you to transition QPI links to Full-Speed or leave them in
S
LOW
-M
ODE
for the QPI data transfer speed.
QPI Frequency
This option selects the desired QPI frequency. Option include Auto , 4.800 GT,
5.866 GT and 6.400 GT.
QPI L0s and L1
This option enables the QPI power state to low power with L0s and L1
automatically selected by the mainboard. The options are D
ISABLED
and
Enabled .
Memory
Frequency
This feature forces a DDR3 frequency slower than what the system has
detected. The available options are
Auto , DDR-800, F
ORCE
DDR-1066 and
F
ORCE
DDR-1333.
Table 5-5. PCIPnP Configuration Sub-menu (Continued)
Menu Option Description