Supermicro SBA-7141M-T, User Manual

Page: 51 / 66

5-13
Chapter 5: BIOS
Remote Access Configuration
The menu options in the R
EMOTE
A
CCESS
C
ONFIGURATION
submenu and their
descriptions are shown in Table 5-11 .
System Health Monitor
The S
YSTEM
H
EALTH
M
ONITOR
submenu’s menu option is shown in Table 5-12 .
Other items in the submenu are systems monitor displays for the following information:
CPU1 T
EMPERATURE
, CPU2 T
EMPERATURE
, CPU3 T
EMPERATURE
, CPU4 T
EMPERATURE
,
(for 4U systems), S
YSTEM
T
EMPERATURE
, CPU1 V
CORE
, CPU2 V
CORE
, CPU3 V
CORE
,
CPU4 V
CORE
(for 4U systems), 3.3V V
CC
, +5V
IN
, +12V
IN
, 5V
STANDBY
and
BATTERY
VOLTAGE
.
Table 5-11. Remote Access Configuration Submenu
Menu Option Description
Remote Access
Allows you to E
NABLE
or Disable remote access. If enabled, the settings below
will appear.
Serial Port Number
Selects the serial port to use for console redirection. Options are COM1 and
COM2.
Serial Port Mode
Selects the serial port settings to use. Options are (115200 8, n, 1) , (57600 8,
N
,
1), (38400 8,
N
, 1), (19200 8,
N
, 1)
AND
(09600 8,
N
, 1).
Flow Control
Selects the flow control to be used for console redirection. Options are None,
H
ARDWARE
and S
OFTWARE
.
Redirection After
BIOS POST
Options are D
ISABLE
(no redirection after BIOS POST), B
OOT
L
OADER
(redirection during POST and during boot loader) and Always (redirection
always active). Note that some OS's may not work with this set to Always.
Terminal Type Selects the type of the target terminal: ANSI , VT100 and VT-UTF8.
VT-UTF8 Combo Key
Support Allows you to Enable or D
ISABLE
VT-UTF8 combination key support for ANSI/
VT100 terminals.
Sredir Memory
Display Delay Use this setting to set the delay in seconds to display memory information.
Options are
No Delay , 1
SEC
, 2
SECS
and 4
SECS
.
Table 5-12. System Health Monitor Submenu
Menu Option Description
CPU Overheat
Temperature
Use the “+” and “-” keys to set the CPU temperature threshold to between 65
o
and 90
o
C. When this threshold is exceeded, the overheat LED on the chassis
will light up and an alarm will sound. The LED and alarm will turn off once the
CPU temperature has dropped to 5 degrees below the threshold set. The default
setting is
72o C .