Supermicro PDSMU User Manual Download Page 54

Page: 54 / 114

4-4

PDSMU User's Manual

Serial ATA

This setting allows the user to enable or disable the function of Serial ATA. The

options are Disabled and

Enabled.

Native Mode Operation

Select the native mode for ATA. The options are: Serial ATA, and

Auto

SATA Controller Mode

Select

Compatible

to allow the SATA and PATA drives to be automatically-detected

and be placed in the Legacy Mode by the BIOS. Select Enhanced to allow the

SATA and PATA drives to be to be automatically-detected and be placed in the

Native IDE Mode. (

*Note: The Enhanced mode is supported by the Windows

2000 OS or a later version.)

When the SATA Controller Mode is set to Enhanced, the following items will

display:

Serial ATA (SATA) RAID Enable

(*Available when the SATA Controller

Mode is set to Enhanced.)

Select Enable to enable Serial ATA RAID Functions. (*For the Windows OS

environment, use the RAID driver if this feature is set to Enabled. When this

item is set to Enabled, the item: "ICH RAID Code Base" will be available for

you to select either Intel or Adaptec Host RAID ﬁ rmware. If this item is set to

Disabled

, the item-SATA AHCI Enable will be available.) The options are

Enabled and

Disabled

ICH RAID Code Base

(*Available when SATA RAID is Enabled.)

Select Intel to enable Intel's SATA RAID ﬁ rmware. Select Adaptec to use Adaptec's

HostRAID ﬁ rmware. The options are

Intel

and Adaptec

SATA AHCI

(*Available when SATA RAID is Disabled.)

Select Enable to enable the function of Serial ATA Advanced Host Interface. (*Take

caution when using this function. This feature is for advanced programmers only.

The options are Enabled and

Disabled

IDE Primary Master/Slave, SATA Port 1, SATA Port 2, SATA Port 3

and SATA Port 4

These settings allow the user to set the parameters of IDE Primary Master/Slave

SATA Port 1, SATA Port 2, SATA Port 3 and SATA Port 4 slots. Hit <Enter> to

activate the following sub-menu screen for detailed options of these items. Set the

correct conﬁ gurations accordingly. The items included in the sub-menu are:

Summary of Contents for PDSMU



















































































































Search results

Summary of Contents for PDSMU

Reviews:

Brands by name

Popular brands

Supermicro PDSMU, User Manual

Search results

Summary of Contents for PDSMU

Reviews:

Brands by name

Popular brands