Supermicro PDSMU, User Manual

Page: 40 / 114

2-22
PDSMU User's Manual
SBX2:PCI-E x4
S
UPER PDSMU
®
KB/MS
GLAN1
Intel
3010
North Bridge
LAN
CTRL
JPL1
Fan5
Buzzer
JLED
24-Pin ATX PWR
ICH7R
J31
8-pin
PWR
Battery
J9
FP CTRL
USB 1/2
VGA
GLAN2
LAN
CTRL
S I/O
COM2 Floppy
DIMM 2B
BIOS
IDE#1
JWOR
J W D
Fan3
DIMM 1B
DIMM 2A
DIMM 1A
Fan1
VGA
CTRL
SATA0
JL1
P W 3
J A R
CPU
FAN
Fan2
JBT1
Fan6
COM1
JPL2
USB
4/5
JPG1
South Bridge
JPF
WOL
Fan4
USB
2/3
SATA1 SATA2
SATA3
SBX1: PCI-E x8 + x8
UID-Button
LE1
PWR_OK
LED
UIOP
SIMSO IPMI
P W 4
UID-LED
Intel Dual-
Core/Quad-
Core CPU
CMOS Clear
JBT1 is used to clear CMOS. Instead
of pins, this "jumper" consists of contact
pads to prevent accidental clearing of
CMOS. To clear CMOS, use a metal ob-
ject such as a small screwdriver to touch
both pads at the same time to short the
connection. Always remove the AC power
cord from the system before clearing
CMOS.
* Note: For an ATX power supply, you
must completely shut down the system,
remove the AC power cord and then short
JBT1 to clear CMOS. Do not use the
PW_ON connector to clear CMOS.
A
B
A. Clear CMOS
B. VGA Enabled
VGA Enable/Disable
JPG1 enables or disables the VGA Con-
nector on the motherboard. See the table
on the right for jumper settings. The
default setting is enabled.
VGA Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled