1-12
PDSMi-LN4+
User’s Manual
are inadequate. A 2 amps of current supply on a 5V Standby rail is strongly rec-
ommended.
The PDSMi-LN4+ accommodates ATX power supplies. In addition to the 24-pin
ATX power supply (JPW1), the 12V 8-pin (JPW2) connection is also required to
provide adequate power supply to the system. It is strongly recommended that you
use a high quality power supply that meets ATX power supply Specifi cation 2.02
or above. Also your power supply must supply 1.5A for the Ethernet ports. It must
also be SSI compliant (info at http://www.ssiforum.org/). Additionally, in areas where
noisy power transmission is present, you may choose to install a line fi lter to shield
the computer from noise. It is recommended that you also install a power surge
protector to help avoid problems caused by power surges.