Supermicro P9DSU-C User Manual Download Page 70

Page: 70 / 72

Appendix A: Software Installation Instructions

A-1

Appendix A

Software Installation Instructions

A-1 Installing Software Programs

After you've installed the operating system, you are ready to install software pro-
grams that have not yet been installed.

Note 1:

To properly install the supported OS, please refer to the instructions

posted on our website at http://www.supermicro.com/support/manuals/.

Note 2:

Your system supports Linux, and all drivers needed for your sys-

tem have been integrated in the Linux kernel. There will be no Driver CD
provided for your system.

Note 3:

To configure onboard Marvell RAID settings, please download the

mvcli-Marvell RAID utility and RAID Configuration documentation from our

website at

http://www.supermicro.com/support/

Summary of Contents for P9DSU-C









































































Search results

Summary of Contents for P9DSU-C

Reviews:

Related manuals for P9DSU-C

Brands by name

Popular brands

Supermicro P9DSU-C, User Manual

Search results

Summary of Contents for P9DSU-C

Reviews:

Related manuals for P9DSU-C

Brands by name

Popular brands