Chapter 2: Installation
2-7
2-4 Processor and Heatsink Installation
Warning
: When handling the processor package, avoid placing direct pressure on
the label area.
Notes:
•
Always connect the power cord last, and always remove it before adding,
removing or changing any hardware components. Make sure that you install
the processor into the CPU socket before you install the CPU heatsink.
•
If you buy a CPU separately, make sure that you use an IBM-certified multi-
directional heatsink only.
•
Make sure to install the system board into the chassis before you install
the CPU heatsink.
•
When receiving a motherboard without a processor pre-installed, make sure
that the plastic CPU socket cap is in place and none of the socket pins are
bent; otherwise, contact your retailer immediately.
•
Refer to the Supermicro website for updates on CPU support.
Installing the Processor
Use a Phillips screwdriver to loosen the
lever screw. Turn the screwdriver counter
clockwise as shown.
