Supermicro MicroBlade MBI-6119M-C2, User Manual

Page: 61 / 87

MBI-6119M-C2 MicroBlade Modules User’s Manual
5-10
Fast Boot This feature Enables or Disables fast path through the MRC.
REFRESH_2X_
MODE
Use this feature to select options for enabling or disabling refreshing 2X
mode. Options include
Disabled , 1-Enabled for WARM or HOT and
2-Enabled for HOT only.
 DMI/OPI
Configuration
This sub-menu displays options for DMI/OPI Configuration.
DMI Information This static display shows DMI Information.
DMI Link ASPM
Control
This setting enables/disables the control of the Active State Power
Management on the SA side of the DMI link. Options include Disabled,
L0s,
L1 and L0sL1.
DMI Extended Sync
Control Use this feature to Enable or Disable DMI Extended Sychronization for
your system.
DMI D-Emphasis
Control Use this feature to configure the De-emphasis control on DMI. Options
include -6 dB or
-3.5 dB .
 PEG Port
Configuration
This sub-menu displays options for PEG Port Configuration.
PEG 0:1:0 This shows static information for the system PCI-E slot used.
Enable Root Port
Use this feature to Enable or Disable the PEG 0:1:0 Root Port. Options
include
Auto , Disabled or Enabled.
Max Link Speed
Use this feature to configure PEG 0:1:0 Max Speed. Options include Auto ,
Gen1, Gen2 and Gen3.
Max Link Width
Use this feature to configure the PEG link to retrain to X1/2/4/8. Options
include
Auto , Force X1, Force X2, Force X4 and Force X8.
ASPM
Use this feature to control ASPM support for the PEG0. This has no effect
if PEG is not the currently active device. Options include Disabled,
Auto ,
ASPM L0s, ASPM L1, ASPM L0sL1.
De-emphasis
Control Use this feature to configure the De-emphasis control on PEG. Options
include -6 dB and
-3.5 dB .
PEG0 Slot
Power Limit
Value Use this number field to set the upper limit on power supplied by the slot.
The power limit (in Watts) is calculated by multiplying this value by the
slot’s Power Limit Scale. Values range from 0-255 with a default of
75 .
PEG0 Slot
Power Limit
Scale
Use this feature to select the scale used for the Slot Power Limit Value.
Options include
1.0x , 0.1xm, 0.01x and 0.001x.
PEGO Physical
Slot Number
This feature sets the physical slot number attached to this port. The
number has to be globally unique with the chassis. Values in this field are
between 0 and 8191. Default is
1 .
PEG0 Max
Payload Size Use the feature to select the PEG0 Max Payload Size. Options include
Auto , 128 TLP and 256 TLP.
PEG 0:1:1 This shows static information for the Onboard Lan1/2 i350 system.
Enable Root Port
Use this feature to Enable or Disable the PEG 0:1:1 Root Port. Options
include
Auto , Disabled or Enabled.
Table 5-5. Chipset Configuration Sub-menu (Continued)
Menu Option Description