4-6
H8QG7/i-LN4F Serverboard User’s Manual
Channel Interleaving
This option allows you to enable Channel Interleaving in the system. The
options are
Auto
and Disabled.
CS Sparing Enable
This option will reserve a spare memory rank in each node when enabled.
Options are Enable and
Disable
.
Power Down Enable
This option
Enables
or Disables DDR power down mode for your system.
Bank Swizzle Mode
This sets the Bank Swizzle Mode to either
Enabled
or Disabled.
ECC Confi guration
ECC Mode
This submenu sets the level of ECC protection. Options include Disabled,
Basic
, Good, Super, Max and User. Selecting User activates the other option
for user setting.
Note:
The "Super" ECC mode dynamically sets the DRAM scrub rate so all
of memory is scrubbed in 8-hours.
DRAM ECC Enable
This setting allows hardware to report and correct memory errors
automatically, maintaining system integrity. Options are
Enabled
or
Disabled.
DRAM Timing Confi guration
DRAM Timing Confi g
This setting specifi es the DRAM timing confi guration. Options are
Auto
and
Manual.
HT Speed Support
This setting selects HT link frequency. Options include HT1 and
Auto
.
Note:
A cold reset is needed after changing this opton.
Summary of Contents for H8QG7-LN4F
