Chapter 4: UEFI BIOS
65
Target Link Speed
If supported by hardware and set to Force to x.S GT/S (x being a value of 2.5, 5.0 or 8.0) for
Downstream Ports, this sets an upper limit on Link Operational Speed by restricting the values
advertised by the UPstream component in its training sequences. When Auto is selected, the
HW initialized data will be used. The options are
Auto
, Force to 2.5 GT/s, Force to 5.0 GT/s,
Force to 8.0 and Force to 16.0 GT/s.
VGA Priority
Use this setting to select between onboard or offboard VGA support. The options are
Onboard
and Offboard.
NVMe Firmware Source
Use this setting to select between the AMI Native firmware support or the device vendor-
defined firmware support. The options are
Vendor Defined Firmware
and AMI Native Support.
M.2(AHCI) Firmware Source
Use this setting to select between the AMI Native firmware support or the device vendor-
defined firmware support. The options are
Vendor Defined Firmware
and AMI Native Support.
M.2 HC1 PCIe 4.0x4 OPROM
This setting enables or disables the listed PCIe Slot OPROM option. The options are Disabled,
Legacy
and EFI.
M.2 HC2 PCIe 4.0x4 OPROM
This setting enables or disables the listed PCIe Slot OPROM option. The options are Disabled,
Legacy
and EFI.
M.2 HC3 PCIe 4.0x4 OPROM
This setting enables or disables the listed PCIe Slot OPROM option. The options are Disabled,
Legacy
and EFI.
M.2 HC4 PCIe 4.0x4 OPROM
This setting enables or disables the listed PCIe Slot OPROM option. The options are Disabled,
Legacy
and EFI.
RSC-PR-6-X2 SLOT1 PCIe 4.0x16 OPROM
The options are Disabled,
Legacy
and EFI.
RSC-P-6-X2 SLOT1 PCIe 4.0x16 OPROM
The options are Disabled,
Legacy
and EFI.
