Supermicro FatTwin F627G2-F73+, User Manual

Page: 12 / 146

1-2
FatTwin F627G2-FT+/FTPT+/F73+/F73PT+ USER'S MANUAL
•
If you have any questions, please contact our support team at:
support@supermicor.com
1-2 Serverboard Features
At the heart of the FatTwin F627G2-FT+/FTPT+/F73+/F73PT+ lies the
X9DRFF-iG+/iTG+/7G+/7TG+, a dual processor serverboard based on the Intel®
C602 chipset. Below are the main features of the serverboard. (See Figure 1-1 for
a block diagram of the chipset.)
Processors
The X9DRFF-iG+/iTG+/7G+/7TG+ supports single or dual Intel® E5-2600 series
processors in Socket R LGA 2011 sockets. Please refer to the serverboard
description pages on our web site for a complete listing of supported processors
( www.supermicro.com ).
Memory
The X9DRFF-iG+/iTG+/7G+/7TG+ has sixteen (16) memory sockets that
can support up to 512 GB of ECC registered RDIMMs or up to 128 GB of
unbuffered ECC/non-ECC UDIMMs in DDR3-1600/1333/1066/800 MHz speed,
1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size, and .at 1.35 or 1.5 voltages.
Please refer to Chapter 5 for installing memory.
Note: For the latest CPU/memory updates, please refer to our website at
http://www.supermicro.com/products/motherboard .
Onboard SAS
An LSI 2308 SAS controller provides eight SAS2 ports. The SAS drives are
connected to a backplane that provides power, bus termination and confi guration
settings. RAID 0, 1, and 10 are supported.
Note: The operating system you use must have RAID support to enable the
hotswap capability and RAID function of the SAS drives.
Onboard Serial ATA
A SATA controller is integrated into the chipset to provide a six-port SATA
subsystem. Two of the ports support SATA 3.0 (RAID 0 and 1) and four support
SATA 2.0 (RAID 0, 1, 5 and 10). See Chapter 5 for details.
Note: The operating system you use must have RAID support to enable the
hotswap capability and RAID function of the SATA drives.