15
Chapter 1: Introduction
Quick Reference Table
Jumper
Description
Default Setting
JBT1
CMOS Clear
Open (Normal)
JPME2
ME Manufacturing Mode
Pins 1-2 (Normal)
JWD1
Watch Dog Timer Enable
Pins 1-2 (Reset)
Connector
Description
Battery (BT1)
Onboard CMOS battery
CPU1 Slot1 PCI-E (JPCEI4)
PCI-E 3.0 x16 slot supported by CPU1
CPU1 Slot2 PCI-E (Slot 2)
PCI-E 3.0 x8 slot supported by CPU1
CPU1 SIOM (SIOM)
PCI-E 3.0 x16 Super IO Module (SIOM) slot supported by CPU1
COM (JCOM1)
COM Port1
FAN1-FAN4
System/CPU cooling fan headers
IPMB (JIPMB1)
System Management Bus header for IPMI 2.0
IPMI_LAN (JIPMILAN)
Dedicated IPMI LAN port supported by BMC (Baseboard Management Controller)
HDD_PWR1/2
8-pin power connectors (1/2) used for HDD devices
HDD_PWR3/4
4-pin power connectors (3/4) used for HDD devices
JPW1/JPW2 (PB PWR1/2)
12-V 8-pin power connectors for ADPs (via cables connected to power adaptor cards)
JPW3 (PB MISC)
8-pin auxiliary power connector for ADP (via a cable connected to a power adaptor card)
JRK1
NVMe RAID Key header
JSDCARD1
BMC SD card header
M.2-HC0/M.2-HC1 (J30/J31)
PCI-E/SATA hybrid M.2 slots (M.2 slots with both PCI-E and SATA support)
PN-NVMe01/2/3 (NVME0/1/2/3)
Onboard NVMe connectors used for PCI-E high-speed storage devices supported by
CPU2
PWR (PWR_SW1)
Front panel power (on/off) switch
(I-)SATA0-3, 4-7
SATA 3.0 connections supported by Intel PCH (I-SATA 0-3, 4-7)
(S-)SATA0-3
SATA 3.0 ports supported by Intel PCH (S-SATA 0-3)
TPM/Port80 (JTPM1)
Trusted Platform Module (TPM)/Port 80 connector
USB0/1 (JUSB1)
Front panel USB 3.0 ports 0/1
UID (JUID1)
Unit Identifier (UID) button
VGA (JVGA1)
VGA port
LED
Description
Status
FAILURE_LED1
Overheat/Fan Fail LED
Solid Red: OH/Fan Failure
HDD_LED1
HDD Activity LED
Blinking Green: HDD Active
LE1
CPLD Heartbeat LED
Blinking Green: CPLD Normal
LED3
M.2 LED (for M.2-HC0-J30)
Blinking Green: M.2-HC0 Active
LED4
M.2 LED (for M.2-HC1-J31)
Blinking Green: M.2-HC1 Active
LEDM1
BMC Heartbeat LED
Blinking Green: BMC Normal
UID_LED1
UID LED
Solid Blue: Unit Identified
