28
Chapter 3: Maintenance and Component Installation
Figure 3-1. Removing the Chassis Cover
3.2 Accessing the Node
Each node in the F610P2-RTN has a removable top cover for easy access to the inside.
Removing a Node Cover
1.
Remove the screw shown below.
2.
Slide the cover toward the rear of the node until it reaches the unlocked position.
3.
Lift the top cover up and off the node.
4.
Check that all ventilation openings on the top cover and the top of the chassis are clear
and unobstructed.
Caution
: Except for short periods of time, do not operate the server without the cover in
place. The cover allows for proper airflow to prevent overheating.
Screw
