FatTwin AS -F1114S-FT User's Manual
28
4. Remove the screws securing the hard drive to the tray and set them aside for later use.
Figure 3-5. Replacing 2.5" Fixed Hard Drives in a Node
1
6
Figure 3-4. Installing a Hard Drive in the Drive Carrier
5
5. Lift the hard drive up and out of the tray.
6. Install a replacement drive into the hard drive tray and secure it to the tray with the
screws previously set aside.
7.
Secure the hard drive tray to the floor of the node with the screw previously set aside.
8. Replace the node cover and return the node to its bay in the chassis.
