Supermicro SCLA15-AW Chassis Series User's Manual
28
PCIe Expansion Cards
The system accepts two full-height, half-length expansion cards, mounted on riser cards and
brackets. Note the differences below when using a dual-CPU motherboard.
Installing an Expansion Card
1. Power down the system as described in section 3.1 and remove the cover.
2.
Pull the riser bracket up and out using the pull-tabs.
Figure 3-11. Riser Card Bracket and Expansion Slots
Expansion Card Configurations
Slot Mechanical
Electrical
1
Full-height, half-length
x16 (CPU1)
2
Full-height, half-length
x16 (CPU2)
Full-height = 4.2", Half-length = 6.6"
Figure 3-10. Expansion Card Slots in the Chassis
2
1
