Chassis CSE-947S JBOD User's Manual
38
Expander Modules
The CSE-947SE1C-R1K66JBOD contains two BPN-SAS3-947EL expander modules, labelled
B and D. The CSE-947SE2C-R1K66JBOD contains four BPN-SAS3-947EL expander
modules, labelled A, B, C, and D. Expander A is located between drives 0-14, expander B is
located between drives 15-29, expander C is located between drives 30-44, and expander D
is located between drives 45-59. Refer to Appendix C for more expander module information.
Removing an Expander Module from the Chassis
1. Each expander module has two latches on its top side, which lock the expander into
place and must be opened to remove the expander from the chassis. Pull both latches
up into the open position, as shown below.
2. Lift the unlocked expander module out of the chassis.
Figure 3-19. Top View of the Open Chassis
Expander A
(947SE2C only)
Expander C
(947SE2C only)
Expander B
Expander D
Figure 3-20. Expander Module Latches
