12
Chassis CSE-947S JBOD User's Manual
Figure 1-9. JBOD Rear Panel Components
Rear Panel Buttons/LEDs
Item
Features
Description
1
UID LED
The UID LED turns on (blue) or off when the UID button is pressed. This is used for
unit identification.
A solid blue light locates the server in a rack mount environment,
and a blinking blue light identifies the server from a remote location.
2
UID button
The unit identification (UID) button turns on or off the blue UID LED. This is used to
locate the server in large racks and server banks.
3
IPMI LED
When the IPMI LED is illuminated, the IPMI setting is default static mode with
192.168.1.99. When the LED is off, the IPMI setting is user mode, which can be
configured as DHCP or a user-configurable static IP address. By default, the LED is
off and the setting is user mode in DHCP.
4
IPMI button
Pressing the IPMI button for at least 6 seconds changes IPMI to default static mode
with 192.168.1.99 and turns the IPMI LED on, or changes IPMI to user mode and
turns the IPMI LED off. Once the setting changes to default static mode, the user
can go to IPMI to configure network settings and then click the Save button. After
these steps, the user must return IPMI to user mode in order for the settings to take
effect.
Rear Chassis Features
Item
Feature
Description
1
Power Supply modules
Two, redundant hot-swap 1600W titanium-level power supplies
2
Fans
Six, hot-swap 80mm high-speed, low vibration cooling fans
3
Mini-SAS Ports
Mini-SAS HD ports for internal or external cascading expander combinations
4
IPMI Port
Networking port used for remote management
4 3
2
1
Press 6 sec
default static (LED on)
user mode (LED off)
