background image

Super C9Z490-PG/-PGW User's Manual

102

•  UEFI Driver

 

•  Adapter PBA
•  Chip Type
•  PCI Device ID
•  PCI Adress
•  Link Status
•  MAC Address

MAC: XXXXXXXXXXXX-IPv4 Network Configuration

Configured

This  feature  indicates  whether  a  network  address  configured  successfully  or  not. The 

default is 

Unchecked

.

*If this feature is set to checked, the following features will become available for 

configuration: 

Enable DHCP

Use this feature to set the DHCP. The default is 

Unchecked

.

*If this feature is set to Unchecked, the following features will become available 

for configuration: 

Local IP Address

 - Enter an IP address in dotted-decimal notation

Local NetMask

 - Enter a NetMask in dotted-decimal notation

Local Gateway

 - Enter a Gateway in dotted-decimal notation

Local DNS Servers

 - Enter a DNS Servers in dotted-decimal notation

Save Changes and Exit

Select this feature to save the changes you've made and return to the upper configura

-

tion page.

Summary of Contents for C9Z490-PG















































































































































Reviews: