Chapter 4: UEFI BIOS
101
Serial Port
This feature will Enable or Disable Serial Port 1 (COM1). Check the box to enable Serial
Port 1. The default is
Checked
.
Device Settings - IO=3F8h; IRQ=4;
Change Settings
This feature configures the IRQ setting for Serial Port 1 (COM1). The options for Se
-
rial Port 1 are
Auto
, "IO=3F8h; IRQ=4", "IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12",
"IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12", "IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12",
and "IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12".
Network Configuration
Note:
This submenu becomes configurable when the Onboard LAN Support (
enabled and
is set to EFI.
Network Configuration
Intel(R) Ethernet Connection (11 I219-V (XX:XX:XX:XX:XX:XX)
PORT CONFIGURATION
NIC Configuration
Link Speed
This feature controls the port speed used for the selected boot protocol. The options
are
Auto Negotiated
, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full.
Wake On LAN
This feature enables the system to be powered on using an in-band packet. The op-
tions are Disabled and
Enabled
.
Blink LEDs
Use this feature to identify a physical network port. Enter a number to force the associ-
ated network port LED to blink.
PORT CONFIGURATION INFORMATION
Information for the LAN port configuration is displayed.