13
Chapter 1: Introduction
Quick Reference Table
Jumper
Description
Default Setting
UID SW
Unit ID switch (push-button toggle switch ON/OFF)
Off
JBT1
Clear CMOS
Open (Normal)
JWD1
Watch Dog control
Pins 1-2 (Reset)
JPL1
LAN Enable/Disable
Pins 1-2 (Enabled)
LED
Description
Status
LED1
UID LED
Blue: UID Activated
LED9
M.2-C2 Interface Detection
On: SATA; Off: PCIe
LED11
M.2-C1 Interface Detection
On: SATA; Off: PCIe
Connector
Description
Battery (BT1)
Onboard CMOS battery
COM 1
Rear panel COM port #1
FAN 1~6
System cooling fan headers
JF1
Front control panel
JSD1, JSD2
SATA DOM power connector
JTPM1
Trusted Platform Module (TPM)/Port 80 connector
SATA16, SATA17
Onboard SATA ports via Asmedia 1061
JL1
Chassis intrusion header
USB 0/1 (3.0)
Back panel USB 3.0 ports (USB 0/1)
USB 2/3 (3.0)
Back panel USB 3.0 ports (USB 2/3)
USB 6/7 (3.0)
Internal USB 3.0 header (USB 6/7)
JIPMI1
IPMI Header
JSXB1A, JSXB2, JSXB1C
Riser slots
JPWR2
24-pin ATX power supply connector
JPWR1
12V 8-pin ATX CPU power connector
M.2-C1, M.2-C2
M.2 Slots
PWRI2C
Power supply SMBus I2C header
LAN1, LAN2
Back panel LAN1, LAN2 connectors
VGA
Back panel VGA port
NVMe 0/1; 2/3; 4/5; 6/7; 8/9; 10/11; 12/13; 14/15
NVMe slots 1~15
SATA0-7; SATA8-15
SATA ports 0-7; 8-15
