Supermicro AOC-PG-i2+, User Manual, Page: 21 / 40

3-5
Chapter 3: Installing the Drivers
Using the DxSetup.exe Utility
DxSetup.exe is a setup utility used for installing Intel PROSet. It detects the system
language, searches for the appropriate transform file in the same folder, and then
launches
PROSETDX.msi in the language specific to the operating system. The
transform file translates the installation instructions to the language associated with your
operating system.
Table 3-3 displays and describes DxSetup.exe switches, while Table 3-4 describes its
public properties.
DxSetup.exe also takes the install options from the command line and applies them to
the PROSETDX.msi command line installation.
Table 3-3. DxSetup.exe Switches
Switch Description
/q[r|n]
Silent install options:
• r - Reduced GUI install
• n - Silent install
/l[i|w|e|a]
Log file options:
• i - Log status messages
• w - Log non-fatal warnings
• e - Log error messages
• a - Log the start of all actions
Table 3-4. DxSetup.exe Public Properties
Switch Description
BD
Property settings are:
• 0 - Deselect / do not execute SetupBD
• 1 - Execute SetupBD to install the drivers (default setting)
NOTE: BD should only be set to 0 if the Base Drivers have already been
installed prior to running DxSetup.exe.
ANS
1
1. The ANS property should only be set to ANS=1 if DMIX=1 is set. If DMIX=0 and ANS=1, the ANS=1 is
ignored and only the base driver will be installed.
Property settings are:
• 0 - Deselect / hide ANS
• 1 - Select ANS (default setting)
DMIX
Property settings are:
• 0 - Deselect / hide Intel PROSet feature
• 1 - Select Intel PROSet feature (default setting)