Super A2SAN-LN4-E/-C User's Manual
72
Aggressive LPM Support
When this feature is set to Enabled, the SATA AHCI controller manages the power usage of
the SATA link. The controller will put the link in a low power mode during extended periods of
I/O inactivity, and will return the link to an active state when I/O activity resumes. The options
are Disabled and
Enabled
.
SATA Frozen
Use this feature to enable the HDD Security Frozen Mode. The options are
Disabled
and
Enabled.
SATA Port 0
Port
Use this feature to enable of disable the specified SATA port. The options are Disabled and
Enabled
.
SATA Port Hot Plug
This feature designates the SATA port specified for hot plugging. Set this feature to Enabled
for hot-plugging support, which will allow you to replace a SATA disk drive without shutting
down the system. The options are
Enabled
and Disabled.
Spin Up Device
When the value of an edge detect or the value of an image binary (pixel) of a device is from
0 to 1, select Enabled to allow the PCH to start a COMRESET initialization sequence on this
device. The options are Enabled and
Disabled
.
SATA Device Type
Use this feature to specify if the specified SATA port should be connected to a Solid State
drive or a Hard Disk Drive. The options are
Hard Disk Drive
and Solid State Drive.
SATA Port DevSlp
DEVSLP is a signal that is sent to a SATA disk drive to tell it to enter a very low power state.
The options are
Disabled
and Enabled.
