Supermicro A0C-SIM1U-3B Add-on Card User Manual Download Page 36

Page: 36 / 74

AOC-SIM1U-3B/3B+ Add-on Card User’s Manual

3-28

Table 3-10. Chassis Control Screen Controls

Item

Name

Description

Chassis Information

The following remote chassis information are included:

• Power Is: This indicates if the system is on or off for the remote

host.

• Power On Counter: If power is on, then the counter indicates the

length of time the power has been turned on.

• Last Restart Cause: This item states the reason why the host

system is restarted if the system has been turned off.

• Refresh: Click the R

EFRESH

button to update the information in

the C

HASSIS

NFORMATION

section above.

Power Control

The following Power Control items are included:

• Power On: Click on this button to power on the system for the

remote host.

• Power Down: Click on this button to power down the system for

the remote host.

• Power Cycle: Click on this button to power down the system for

the remote host and turn it back on later.

• Reset: Click on this button to reset the remote console.

Summary of Contents for A0C-SIM1U-3B Add-on Card











































































Search results

Summary of Contents for A0C-SIM1U-3B Add-on Card

Reviews:

Related manuals for A0C-SIM1U-3B Add-on Card

Brands by name

Popular brands

Supermicro A0C-SIM1U-3B Add-on Card, User Manual

Search results

Summary of Contents for A0C-SIM1U-3B Add-on Card

Reviews:

Related manuals for A0C-SIM1U-3B Add-on Card

Brands by name

Popular brands